RX8 engines 1620510_944356492259153_1181115861709228973_n 10723533_10201944774100541_1219134973_n 294194_290281954333280_1013205595_n
These prices are for a stock rebuild on a rotary engine block. Parts used for our engine builds are mostly factory Mazda parts except for the parts most commonly recommended to upgrade from O.E such as apex seals (for performance on street/strip cars), corner button springs (as opposed to wire spring on RX7), oil control rings, and eccentric shaft oil thermostat (for better flow on cold starts). The Parts that are upgraded between RX7 and RX8 engines vary between the two, and other parts such as bearings and other components will be changed accordingly. If a core is unavailable, core charge will be added to the engine build.  All of our engines are strictly inspected up to the service limit so that we may offer a 1 year unlimited mile warranty for daily driven N/A and boosted vehicles. All though these engines will still handle some abuse for race applications; detonation, overheating, negligence and/or over boosting a non-reinforced engine (Breaking a front or rear engine plate) will not be covered under this warranty.  It is recommended that an engine intended for use in any type of racing that you use only NEW rotors, housings, and resurfaced plates! Please refer to our terms and conditions at the bottom of the main page for more info on warranties/core fee conditions/engine installation liabilities etc.
Other options to add to your rebuild
  • Engine doweling
  • Engine porting (shape and size of the intake and exhaust ports do matter as this is crucial for performance)

                                                    General Pricing Information

10836530_10202194456302440_723312435_n2004-2008 RX-8 RENESIS engines (includes 4-port 6-port and Auto 6-port)

  • $2795 + $750 core charge/Deposit
  • $1500-$2500 if engine is sent in for Rebuild. (If core is completely unusable, we will sell you ours for $2795 accepting your engine as the core. THIS IS ALSO USING BUDGET PARTS OR COMBINATION)
  • $150-$300 base payment is offered for engine cores offered to us for sale as a complete long block assembly (we pay shipping for these cores).
  • Engine availability varies from week to week as many orders come in, and we receive cores on a weekly basis.  Normally a 2 week turn around to get engine done from date of purchase, if longer a longer wait will occur, we will notify you at time of purchase.  SHIPPING IS NOT INCLUDED ON ANY OF OUR PRICING ON THIS PAGE UNLESS STATED! CALL US FOR A SHIPPING QUOTE.

NOTE! WE WILL NOT ACCEPT A CORE THAT HAS BEEN DISASSEMBLED AS A REPLACEMENT CORE! IF YOU ARE SENDING AN ENGINE TO REBUILD, WE WILL NEITHER ACCEPT IT TORN APART AS MANY HAVE COME IN DAMAGED DUE TO IMPROPER DISASSEMBLY AND/OR PACKAGING BEFORE SHIPMENT!

RX-7 ENGINES – Please call for pricing as availability of these engine varies.

  • Street Port- $450
  • Monster Street Port- $600
  • Monster Street Port / Polish – $900
  • Monster Street Port / Polish / Flow – $1500
  • Bridge Port- $1550 (Half bridge)
  • Bridge Port / Polish – $1850 (Half Bridge)
  • Bridge Port / Polish / Flow – $2150 (Half Bridge)
  • End and intermediate plate resurfacing – $100 ea. end $150 ea. Intermediate

 

Engine Rebuild Prices- Engine rebuild price is assuming that engine core has good serviceable engine plates, rotors, housings, eccentric shaft, bearings, Stationary gears, oil pump, thrust washers/spacers and oil pan/front cover etc. (If any parts are requested/recommended NEW upon order, Prices will rise accordingly and be explained to customer in detail at time of purchase/payment.)

10716074_10201929412156502_606889422_n

10A- Call for pricing
12A (79-85)- Call for pricing
13B (GSL-SE 84-85)- Call for pricing
13B (86-88 N/A)- $1575 (W/ BUDGET PARTS OR COMBINATION)
13BT (86-88)- $1575 (W/ BUDGET PARTS OR COMBINATION)
13B (89-91 N/A)- $1575 (W/ BUDGET PARTS OR COMBINATION)
13BT (89-91)-$1575 (W/ BUDGET PARTS OR COMBINATION)
13B REW (93-95)- $1575 (W/ BUDGET PARTS OR COMBINATION)
13B RENESIS (RX8 04-present)- $1500 (W/ BUDGET PARTS OR COMBINATION)
These prices do not include shipping if necessary.  Call for Pricing on JDM engines such as 2-Rotor and 3-Rotor Cosmo

REBUILT ENGINES WITH NEW HOUSINGS that come with a 2 year WARRANTY UNLIMITED MILES! PLEASE CALL FOR PRICING!

 

 

 

10806942_10202135304063671_632335929_n

RACE OPTIONS
Street Port $450
Monster Street Port $600
Monster Street Port/Polish/Flow $1,500
Half Bridge Port $1,550
Half Bridge Port/Polish $1,850
Half Bridge Port/Polish/Flow $2,150
3mm rotor machining $450 ea.
Engine Reinforcement $850
Engine Balancing $875